SSD1353

简介

Advance Information
 
160 RGB x 132 Dot Matrix 


OLED/PLED Segment/Common Driver with Controller

 

The SSD1353 is a CMOS OLED/PLED driver with 480 segments and 132 commons output, supporting up to 160RGB x 132 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.


The SSD1353 had embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 9, 16, 18 bits 8080 / 6800 parallel interface as well as Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display to OLED panels. This driver IC can be widely used in many applications such as MP3, PDA, PMP, mobile phone and Digital Camera.
 

Contact our sales representative for more information:

Features

  • Resolution: 160RGB x 132 dot matrix panel
  • Portrait and Landscape mode data input
  • 262K color depth supported by embedded 160x132x18 bit SRAM display buffer
  • Power supply: 

– VDD = 2.4V – 2.6V     (Core VDD power supply)

– VDDIO = 1.6V – VCI   (MCU interface logic level)

– VCI = 2.4V – 3.5V      (Low voltage power supply)

– VCC = 10.0V – 21.0V  (Panel driving power supply)

  • Segment maximum source current: 160µA
  • Common maximum sink current: 60mA
  • 256 step brightness current control for the each color component plus 16 step master current control
  • Pin selectable MCU interfaces:

– 8/9/16/18 bits 6800-series parallel Interface

– 8/9/16/18 bits 8080-series Parallel Interface

– Serial Peripheral Interface

  • Color swapping function (RGB – BGR)
  • Support various color depth

– 262k color (6:6:6)

– 65k color (5:6:5)

– 256 color (3:3:2)

  • Screen saving continuous scrolling function in both horizontal and vertical action 
  • Graphic Accelerating Command (GAC) set
  • Programmable Gamma functions
  • RAM write synchronization signal
  • Programmable Frame Rate
  • On Chip Oscillator
  • Power saving mode
  • Dim mode
  • Non-Volatile Memory (OTP) for color coordinate calibration
  • Slim chip layout best suit for COF
  • Operating temperature range -40°C to 85°C
     

Ordering Information

Ordering Part No. SSD1353U7R1
Package COF
Ordering Part No. SSD1353Z
Package Gold Bump Die
Ordering Part No. Package
SSD1353U7R1 COF
SSD1353Z Gold Bump Die