簡介
Contact our sales representative for more information:
Features
- MIPI input – 4 lanes, each up to 1.5Gbps
- Half-WUXGA (0.5 x 1920 x 1200 pixels) frame buffer
- Dual MIPI output – 2 x DSI with 2 individual clock lanes, sharing 4 lanes, each up to 1.5Gbps.
- Support both video and command MIPI input and split into 1 or 2 MIPI DSI video output
- Support compressed MIPI input as well as compressed MIPI output, allowing reduced bandwidth requirement at both MIPIRX and MIPITX links of SSD2858K1. 2 types of compression are supported.
- SSL segment-based (4 pixels per segment) data compression/decompression with zero software overhead
- Qualcomm line-based compression and decompression
- Support rotation of up to 1280×800 resolution with SSL Compression
- Support rotation of up to 960×600 resolution without image compression
- Bi-cubic image scaler supporting fractional scaling
- Support independent bi-directional data transfer (forward link in High Speed and Low Power mode and reverse link in Low Power mode) for each DSI
- Support Ultra low power mode in idle state for all DSI engines
- On-chip PLL with variable output frequency which will allow lower video refresh rate for oxide-TFT panel
- Support MIPI (Video+Command) mode
- All MIPI packets re-transmission is done automatically once initial setup is performed
- Reduce power consumption and decrease EMI by using low amplitude signal over differential pair for serial data.
- Built-in high efficiency charge pump to generate 3.0V for VDDRAM
- Power supply: (VCORE and AVDD*) 1.2V +/-5%
- IO Power supply: (VDDIO and VCI*) 1.8 +/-5%
- Support MIPI standard DSI (v1.01.00), DCS (v1.02.00), D-PHY (v1.1)
- Operating Temperature : -40 to 125 deg C
Ordering Information
Ordering Part No. | SSD2858QL9 |
Package | LQFP,128L (Tray) |
Ordering Part No. | SSD2858K1R |
Package | 84 WLCSP (Tape & Reel) |
Ordering Part No. | Package |
---|---|
SSD2858QL9 | LQFP,128L (Tray) |
SSD2858K1R | 84 WLCSP (Tape & Reel) |