SSD2861

简介

Contact our sales representative for more information:

Features

General

  • Support panel with resolution up to WQXGA (2560 x 1800) at a refresh rate of 60Hz.
  • Support 18, 24-bit per pixel color.
  • Seamless bridging of eDP protocol to MIPI DSI protocol for power-on and sleep-in/out sequence.
  • Auto insertion of black frames when video link from eDP source is off.
  • Support external EDID. External EDID is read from EEPROM (max. 16Kbit) via I2C interface.
  • Support the use of external I2C EEPROM (32Kbits) for configuring SSD2861.
  • 4 GPO pins for general purpose control.
  • Support MIPI and eDP lane/polarity static swap.
  • Support MIPI DSI static swap for dual DSI output.
  • Power Supply: 1.2V and 1.8V
  • Built-in DC-DC for 3.0V IO supply (required for HPD pin).
  • 88 Leads QFN package with 0.4mm pitch.

eDP RX

  • Compliant to VESA’s DisplayPort Specification version 1.2a.
  • Compliant to VESA Embedded DisplayPort (eDP™) Specification 1.2.
  • Support 1, 2 or 4-lane configuration on the eDP Main Link.
  • Support eDP receive link rate of 1.62 Gbps and 2.7 Gbps.
  • Support AUX channel link up to 1Mbps.
  • Support full link training, and fast link training.
  • Support adaptive equalizer with 3 level of pre-emphasis.
  • Support 3 levels of differential voltage swing.
  • Support Spread spectrum clocking.
  • Support Backlight Control through PWM output.
  • BIST generator outputs test pattern.

MIPI DSI TX

  • Compliant to MIPI DSI standard for DPHY (v1.01) DSI (v1.01) and DCS (v1.02).
  • Send MIPI DCS/Generic commands for write and read access via standard I2C, SPI or I2C-over-AUX interfaces.
  • Support 1, 2, 3 or 4-lane configuration.
  • Support Video mode output.
  • Support MIPI transmit link rate up to 1Gbps per lane.
  • Support maximum of 8Gbps using 2 MIPI DSI TX output in 4-lane configuration.
  • Support independent bi-directional access for each DSI.
  • Support ultra low power mode.

Ordering Information

Ordering Part No. SSD2861QN10
Package 88L QFN (Tray)
Ordering Part No. SSD2861QN10R
Package 88L QFN (Tray & Reel)
Ordering Part No. Package
SSD2861QN10 88L QFN (Tray)
SSD2861QN10R 88L QFN (Tray & Reel)