SSD2861

Introduction

Contact our sales representative for more information:

Features

General

  • Support panel with resolution up to WQXGA (2560 x 1800) at a refresh rate of 60Hz.
  • Support 18, 24-bit per pixel color.
  • Seamless bridging of eDP protocol to MIPI DSI protocol for power-on and sleep-in/out sequence.
  • Auto insertion of black frames when video link from eDP source is off.
  • Support external EDID. External EDID is read from EEPROM (max. 16Kbit) via I2C interface.
  • Support the use of external I2C EEPROM (32Kbits) for configuring SSD2861.
  • 4 GPO pins for general purpose control.
  • Support MIPI and eDP lane/polarity static swap.
  • Support MIPI DSI static swap for dual DSI output.
  • Power Supply: 1.2V and 1.8V
  • Built-in DC-DC for 3.0V IO supply (required for HPD pin).
  • 88 Leads QFN package with 0.4mm pitch.

eDP RX

  • Compliant to VESA’s DisplayPort Specification version 1.2a.
  • Compliant to VESA Embedded DisplayPort (eDP™) Specification 1.2.
  • Support 1, 2 or 4-lane configuration on the eDP Main Link.
  • Support eDP receive link rate of 1.62 Gbps and 2.7 Gbps.
  • Support AUX channel link up to 1Mbps.
  • Support full link training, and fast link training.
  • Support adaptive equalizer with 3 level of pre-emphasis.
  • Support 3 levels of differential voltage swing.
  • Support Spread spectrum clocking.
  • Support Backlight Control through PWM output.
  • BIST generator outputs test pattern.

MIPI DSI TX

  • Compliant to MIPI DSI standard for DPHY (v1.01) DSI (v1.01) and DCS (v1.02).
  • Send MIPI DCS/Generic commands for write and read access via standard I2C, SPI or I2C-over-AUX interfaces.
  • Support 1, 2, 3 or 4-lane configuration.
  • Support Video mode output.
  • Support MIPI transmit link rate up to 1Gbps per lane.
  • Support maximum of 8Gbps using 2 MIPI DSI TX output in 4-lane configuration.
  • Support independent bi-directional access for each DSI.
  • Support ultra low power mode.

Ordering Information

Ordering Part No. SSD2861QN10
Package 88L QFN (Tray)
Ordering Part No. SSD2861QN10R
Package 88L QFN (Tray & Reel)
Ordering Part No. Package
SSD2861QN10 88L QFN (Tray)
SSD2861QN10R 88L QFN (Tray & Reel)

Cookies and Privacy Policy

We use cookies to enhance your experience on our Website. By continuing to use this Website, you agree to the use of these cookies. For more information on how we use cookies, and to learn how you can change your cookie settings, please read our Privacy Policy.