SSD1351

Introduction

Advance Information
 
128 RGB x 128 Dot Matrix 


OLED/PLED Segment/Common Driver with Controller

 

CMOS

 

The SSD1351 is a CMOS OLED/PLED driver with 384 segments and 128 commons output, supporting up to 128RGB x 128 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.


The SSD1351 has embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 16, 18 bits 8080 / 6800 parallel interface, Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display on OLED panels.
 

Contact our sales representative for more information:

Features

  • Resolution: 128RGB x 128 dot matrix panel
  • 262k color depth supported by embedded 128x128x18 bit SRAM display buffer
  • Power supply 

– VDDIO= 1.65V – VCI   (MCU interface logic level)

– VCI= 2.4V – 3.5V      (Low voltage power supply)

– VCC= 10.0V – 18.0V  (Panel driving power supply)

  • Segment maximum source current: 200µA
  • Common maximum sink current: 70mA
  • 256 step brightness current control for the each color component plus 16 step master current control
  • Pin selectable MCU Interfaces:

– 8/16/18 bits 6800-series parallel interface

– 8/16/18 bits 8080-series parallel interface

– 3-wire and 4-wire Serial Peripheral Interface

  • Support various color depths

– 262k color (6:6:6)

– 65k color (5:6:5)

  • Gamma Look Up Tables (GLUT) with 8 bit entry
  • Row re-mapping and Column re-mapping
  • Vertical and horizontal scrolling
  • Programmable Frame Rate and Multiplexing Ratio
  • On-chip Oscillator
  • Color Swapping Function (RGB-BGR), arranged in RGB sequence when reset
  • Slim chip layout for COF
  • Operating temperature range -40ºC to 85ºC
     

Ordering Information

Ordering Part No. SSD1351Z
Package COG
Ordering Part No. SSD1351UR1
Package COF
Ordering Part No. Package
SSD1351Z COG
SSD1351UR1 COF