Advance Information

LCD Segment / Common COLOR Driver with Controller

SSD1777 is a single-chip CMOS color STN LCD driver with controller for dot-matrix graphic liquid crystal display system. SSD1777 consists of 362 high voltage driving output pins for driving maximum 98 RGB Segments and 68 Commons. 

SSD1777 consists of 98 x 68 x 16 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from common MCU through 8/16-bit 6800-series / 8080-series compatible Parallel Interface or 3-wires / 4-wires Serial Peripheral Interface by pins selection. 

SSD1777 embeds DC-DC Converter, On-Chip Oscillator and Bias Divider so as to reduce the number of external components. With the advanced design, low power consumption, stable LCD operating voltage and flexible die package layout, SSD1777 is suitable for any portable battery-driven applications requiring long operation period with compact size.

• Power Supply: V_DDIO = 1.2V – VDD
                        V_DD = 2.4V – 3.6V
                         V_CI = VDD - 3.6V

• LCD Driving Output Voltage: 13.5V

• Low Current Sleep Mode

• Maximum display size: 98 RGB columns by 68 rows

• Maximum display colors: 256 colors, 4096 colors or 65536 colors graphical display

• 256-colors Position Control and simultaneous RGB display control

• 8/16-bit 6800-series / 8080-series Parallel Interface, 3-wires /4-wires Serial Peripheral Interface

• On-Chip 98 X 68 x 16 = 106,624 bits Graphic Display Data RAM

• Programmable partial display function

• Column Re-mapping and RAM Page scan direction control 

• Software selection on Center Screen Scrolling, Top Screen Scrolling, Bottom Screen Scrolling and Whole Screen Scrolling 

• On-Chip Voltage Generator or External LCD Driving Power Supply Selectable

• 3X/ 4X / 5X / 6X On-Chip DC-DC Converter with internal flying capacitor 

• 64 Levels Internal Contrast Control 

• Programmable LCD Driving Voltage Temperature Compensation Coefficients

• On-Chip Bias Divider with internal flying capacitor (expect VOUT)

• Programmable drive duty ratio: 1 /8 to 1 /68 

• On-Chip Oscillator 

• Non-Volatile Memory (OTP) for calibration