Advance Information

160RGB x 132 Dot Matrix
OLED/PLED Segment/Comment Driver with Controller

The SSD1353 is a CMOS OLED/PLED driver with 480 segments and 132 commons output, supporting up to 160RGB x 132 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.

The SSD1353 had embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 9, 16, 18 bits 8080 / 6800 parallel interface as well as Serial Peripheral Interface. It has 256-step contrast and 262K color control , giving vivid color display to OLED panels. This driver IC can be widely used in many applications such as MP3, PDA, PMP, mobile phone and Digital Camera.

• Resolution: 160RGB x 132 dot matrix panel

• Portrait and Landscape mode data input

• 262K color depth supported by embedded 160x132x18 bit SRAM display buffer

• Power supply: 

  • V_DD = 2.4V - 2.6V     (Core VDD power supply)

  • V_DDIO = 1.6V - VCI  (MCU interface logic level)

  • V_CI = 2.4V - 3.5V      (Low voltage power supply)

  • V_CC = 10.0V - 21.0V  (Panel driving power supply)

• Segment maximum source current: 160µA

• Common maximum sink current: 60mA

• 256 step brightness current control for the each color component plus 16 step master current control

• Pin selectable MCU interface

  • 8/9/16/18 bits 6800-series parallel Interface

  • 8/9/16/18 bits 8080-series Parallel Interface

  • Serial Peripheral Interface

• Color swapping function (RGB - BGR)

• Support various color depth

  • 262k color (6:6:6)

  • 65k color (5:6:5)

  • 256 color (3:3:2)

• Screen saving continuous scrolling function in both horizontal and vertical action 

• Graphic Accelerating Command (GAC) set

• Programmable Gamma functions

• RAM write synchronization signal

• Programmable Frame Rate

• On Chip Oscillator

• Power saving mode

• Dim mode

• Non-Volatile Memory (OTP) for calibration

• Slim chip layout best suit for COF

• Operating temperature range -40°C to 85°C