Advance Information

OLED/PLED Segment/Common Driver with Controller

The SSD1351 has embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 16, 18 bits 8080 / 6800 parallel interface, Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display on OLED panels.

• Resolution: 128RGB x 128 dot matrix panel

• 262k color depth supported by embedded 128x128x18 bit SRAM display buffer

• Power supply 

  • V_DD= 2.4V - 2.6V     (Core V_DD power supply, can be regulated from V_CI)

  • V_DDIO= 1.65V - V_CI   (MCU interface logic level)

  • V_CI= 2.4V - 3.5V      (Low voltage power supply)

  • V_CC= 10.0V - 18.0V  (Panel driving power supply)

  • When V_CI is lower than 2.6V, V_DD should be supplied by external power source

• Segment maximum source current: 200µA

• Common maximum sink current: 70mA

• 256 step brightness current control for the each color component plus 16 step master current control

• Pin selectable MCU Interfaces

  • 8/16/18 bits 6800-series parallel interface

  • 8/16/18 bits 8080-series parallel interface

  • 3-wire and 4-wire Serial Peripheral Interface

• Support various color depths

  • 262k color (6:6:6)

  • 65k color (5:6:5)

• Gamma Look Up Tables (GLUT) with 8 bit entry

• Row re-mapping and Column re-mapping

• Vertical and horizontal scrolling

• Programmable Frame Rate and Multiplexing Ratio

• On-chip Oscillator

• Color Swapping Function (RGB-BGR), arranged in RGB sequence when reset

• Slim chip layout for COF

• Operating temperature range -40ºC to 85ºC