Introduction
Advance Information
Full-HD Mobile Multimedia Processor
The SSD1938 mobile multimedia processor is the third generation of MagusCoreTM products offering superb performance, with full HD decode, high level of integration and ultra-low powerconsumption to address applications like pico-projector, portable media players, mobile internet devices and personal navigation devices
The SSD1938 is packed with a wide array of connectivity options including UART, SPI, USB 2.0 ports with PHY, MMC/SDHC/SDIO and Ethernet MAC ports. To reduce BOM cost, the SSD1938 integrates Keystone vertical tilt compensator, a high-quality audio codec, an analogue-to digital converter for touch panel, as well as a TV encoder for NTSC/PAL video output. Support of various external memory interfaces like mobile-DDR, DDR2 SDRAM, SLC/MLC NAND, SRAM and NOR flash offers great flexibility to system designers.
Features
- ARM1176JZF-based CPU core with 16KB I-cache and 16KB D-cache, 4KB I-TCM and 4KB D –TCM, operating up to 800MHz
- Video Processing Unit (VPU) to support multi-format video codec
- Video Post Processor (VPP) for high-definition video and image processing.
- Serial/parallel Transport Stream Interface (TSI) to directly interface with digital TV demodulator
- 16-bit TVout interface with external TV encoder IC.
- 24-bit camera interface for external CMOS sensor and TV decoder
- On-chip NTSC/PAL video encoder for TV output (CVBS)
- On-chip 24-bit audio codec for high-quality stereo input and output
- On-chip 10-bit ADC supports touch screen controller for resistive touch panel and battery monitoring
- Built-in dynamic backlight controller (DBC) for energy saving
- Vertical keystone correction for Pico-projector application.
- 2D Graphics Accelerator with BitBLT, alpha blending and hardware rotation
- Dual LCD controller supports as below configuration
| Condition | Primary | Secondary | Remarks |
|
Single Display
2D Video (TFT)
|
WXGA (1366x768)
60 Hz & 24-bit,
no floating window
|
N/A | up to 1080p 15Mbps |
|
Single Display
2D Video (with external
HDMI Transmitter chip)
|
1920x1080
30 Hz & 24-bit,
no floating window
|
N/A | up to 1080p 15Mbps |
|
Dual Display
2D Video (TFT) + UI
(TFT)
|
WXGA (1366x768)
60 Hz & 24-bit,
no floating window
|
VGA (640x480)
60Hz & 24-bit
|
up to 1080p 12Mbps |
|
Dual Display
2D Video (TFT) + same
2D video (TFT)
|
WXGA (1366x768)
60 Hz & 24-bit,
no floating window
|
WVGA (854x480)
60 Hz & 24-bit,
no floating window
|
up to 720p 10Mbps |
|
Dual Display
3D Video (TFT)
|
XGA (1024x768)
60Hz & 24-bit
no floating window
|
XGA (1024x768)
60Hz & 24-bit
no floating window
|
Dependent on 3D
video file format and
3D display format
|
- External Memory controller :
- Support mobile DDR (up to 1GB at 200MHz) and DDR2 (up to 2GB at 400MHz)
- Supports 16-bit NAND Flash memory with 64-bit hardware ECC engine for 1024 byte
- EXPIO (support NOR flash up to 64MB)
- Connectivity :
- USB 2.0 Host x 1 (480Mbps)
- USB 2.0 Device x 1 (480Mbps)
- 4-bit MMC/SDHC/SDIO x 3 (44MHz)
- Ethernet MAC (up to 10 /100 Mbps)
- Support up to 8x8 keypad
- Rich connectivity (UARTx4, PWM, I2S, I2C, SPI master / slave, GPIO)
- SIM card interface enables Conditional Access for Paid Mobile TV content
- Infra Red control
- Flexible boot mode selection from Raw NAND, ONFI NAND, PBA NAND, UART, USB,
SDHC (eMMC), SPI-Master, SPI-Slave and NOR flash
- JTAG controller for debug purpose
- General Purpose Timer (GPT) x 4, Watchdog Timer (WDT) and Real Time Clock (RTC)
- On-chip LDO and sequencer for low power mode operation.
- Ultra-low power consumption. Power down current less than 5uA. Sleep mode current less than 300uA.
- Power Supply:
– 1.3V (Core); 1.8 (Memory); 2.4V (eFuse); 1.8V/3.3V (I/O)
- 373 balls TFBGA package with 0.65mm pitch
Ordering Information
| Ordering Part No. | Package | Remarks |
| SSD1938G24 | TFBGA-373 | - |
Contact our sales representative for more information:
Tel: (852) 2207 1111
sales@solomon-systech.com
or
Request a datasheet
Tel: (852) 2207 1111
sales@solomon-systech.com
or
Request a datasheet