Advance Information
 
128 RGB x 128 Dot Matrix 


OLED/PLED Segment/Common Driver with Controller

CMOS

The SSD1351 is a CMOS OLED/PLED driver with 384 segments and 128 commons output, supporting up to 128RGB x 128 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.

The SSD1351 has embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 16, 18 bits 8080 / 6800 parallel interface, Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display on OLED panels.
 

• Resolution: 128RGB x 128 dot matrix panel
• 262k color depth supported by embedded 128x128x18 bit SRAM display buffer
• Power supply 

- VDDIO= 1.65V - VCI   (MCU interface logic level)

- VCI= 2.4V - 3.5V      (Low voltage power supply)

- VCC= 10.0V - 18.0V  (Panel driving power supply)

• Segment maximum source current: 200µA
• Common maximum sink current: 70mA
• 256 step brightness current control for the each color component plus 16 step master current control
• Pin selectable MCU Interfaces:

- 8/16/18 bits 6800-series parallel interface

- 8/16/18 bits 8080-series parallel interface

- 3-wire and 4-wire Serial Peripheral Interface

• Support various color depths

- 262k color (6:6:6)

- 65k color (5:6:5)

• Gamma Look Up Tables (GLUT) with 8 bit entry
• Row re-mapping and Column re-mapping
• Vertical and horizontal scrolling
• Programmable Frame Rate and Multiplexing Ratio
• On-chip Oscillator
• Color Swapping Function (RGB-BGR), arranged in RGB sequence when reset
• Slim chip layout for COF
• Operating temperature range -40ºC to 85ºC